No-sew pin cushion from Jen Rzasa

Here's Jen and her fun project!
Today’s project is a cute no-sew pin cushion that took me about 15 minutes to make! I started out by picking a rub-on design that I thought would look good, and some fabric (choose one with little or no stretch, so you don’t warp your design)

Cut out a piece of the fabric just bigger than a wooden embroidery hoop (I got mine for about 2 bucks at the craft store)

Apply your design:

At this point, you could just pop the fabric into the hoop, and hang it up as wall art.

….but I’m making a pin cushion, remember? So here’s the next step- cut another piece of fabric, and put some stuffing in between the two layers

Sandwich together the inner ring of the hoop (on the bottom), your stuffed fabric layers, and the larger ring of the hoop (on top). Tighten the screw.

I cut off the excess fabric with pinking shears to avoid fray, but you could probably just use regular scissors.

Next, I adhered the fabric to the frame with some hot glue.

And there you have it!

So glad you could stop by!